manualshive.com logo in svg

HP 9000 Series 700, Manual

The HP 9000 Series 700 Owner's Manual is an essential guide to maximize your product's potential. Find and download this comprehensive manual for free on our website, ensuring you have a convenient and easy-to-access resource. Unlock the full capabilities of your HP 9000 Series 700 with this detailed manual.

Share
Download
background image

107

Configuring a DTC to enable a printer

8

The location of a printer and an assigned device file name must be specified in a
DTC Device File Access (DDFA) utilities configuration file. This chapter describes
how to use DDFA to configure a printer on a DTC. Refer to the DTC Device File
Access Utilities and Telnet Port Identification Manual and HP-UX System
Administration Tasks Manual from your HP-UX System Administrator's
documentation set for complete information about DDFA. More information is
available in the following man pages:

•

ddfa(7)

DTC Device File Access Utilities description

•

dp(4)

Dedicated port file

•

dpp(1m)

Dedicated port file parser

•

ocd(1m)

Outbound connection daemon

•

ocdebug(1m)

Debug version of ocd

•

pcf(4)

Port configuration file.

Using DDFA to create a device file name for the printer port

DDFA configuration is based on the

/usr/examples/ddfa/dp

 file. Follow the

steps below to create a device file.

1

Ensure that you are logged in as root.

2

Check whether the file

/etc/ddfa/dp

 exists.

If this file already exists, go to step 6, otherwise go to the next step.

3

Create a directory for the DDFA files. HP recommends

/etc/ddfa

, as follows:

# mkdir /etc/ddfa

4

Copy the master template dedicated port file, dp, to the DDFA directory:

# cp /usr/examples/ddfa/dp /etc/ddfa/dp

Do not alter

/usr/examples/ddfa/dp

, so that you keep a master template dp

file.  Altering

/etc/ddfa/dp

 is explained in step 6.

5

Copy the master template port configuration file, pcf, to the DDFA directory:

# cp /usr/examples/ddfa/pcf /etc/ddfa/pcf

Do not alter

/usr/examples/ddfa/pcf

, so that you keep a master template

pcf file.

Summary of Contents for 9000 Series 700































































































































































































































Reviews:

No comments

Related manuals for 9000 Series 700

Samson 3510 Mounting And Operating Instructions preview
3510
Brand: Samson Pages: 48
Mako Networks 6000 Series Quick Installation Manual preview
6000 Series
Brand: Mako Networks Pages: 15
GE Concord express Instruction Manual preview
Concord express
Brand: GE Pages: 3
Kathrein CAP Converter Operating Instructions Manual preview
CAP Converter
Brand: Kathrein Pages: 16
National Instruments IC-3173 Getting Started Manual preview
IC-3173
Brand: National Instruments Pages: 14
National Instruments SCXI-1104 Manual preview
SCXI-1104
Brand: National Instruments Pages: 11
Nauticam 25624 Instruction Manual preview
25624
Brand: Nauticam Pages: 2
National Instruments NI 9265 Getting Started Manual preview
NI 9265
Brand: National Instruments Pages: 18
National Instruments PXIe-4310 Calibration Procedure preview
PXIe-4310
Brand: National Instruments Pages: 10
National Instruments cRIO-9032 Getting Started Manual preview
cRIO-9032
Brand: National Instruments Pages: 20
NAPCO GEMINI C Series Installation Instructions Manual preview
GEMINI C Series
Brand: NAPCO Pages: 24
Ublox EVK-W262U Quick Start preview
EVK-W262U
Brand: Ublox Pages: 2
u-blox NINA-B1 Series Getting Started preview
NINA-B1 Series
Brand: u-blox Pages: 19
TCS CS-105 Quick Start Manual preview
CS-105
Brand: TCS Pages: 16
Vaillant VRT 340f Operating Instruction preview
VRT 340f
Brand: Vaillant Pages: 32
Vaillant VRT 330 Manual preview
VRT 330
Brand: Vaillant Pages: 27
Vaillant VRC 470 Operating Instructions Manual preview
VRC 470
Brand: Vaillant Pages: 40
Vaillant VRT 350f Installation Instructions Manual preview
VRT 350f
Brand: Vaillant Pages: 36

Brands by name

Popular brands

Load more brands