HP 9000 Series 700, Manual

Page: 88 / 222

88
Configurable port parameters 8
Configurable port parameters
The following port attributes are covered in this chapter.
• Port Parameters are listed below and explained in the section see “Configuring
terminal and printer port parameters” on page 91.
• Terminal or Printer Name or IP address
• Line Speed
• Attached Device
• Bits Parity (called “Parity” in version A.14.29)
• Number of Stop Bits (applies to version A.14.2C and later versions)
• Modem Behavior (for modem ports)
• Data Transfer Mode (applies to version A.14.2C and later versions for
terminal ports)
• Escape from Data Transfer character (for terminal ports)
• Maximum Number of Sessions (for terminal ports)
• Number of Systems Sharing Printer (for printer ports)
• Default Destination
• Initialization string
• Port Options are listed below and explained in the section see “Enabling port
options” on page 99.
• Enable Auto Speed/Parity Sensing (for terminal ports)
• Enable DTC User Interface Timeout (for terminal ports)
• Enable Port
• Enable Switching (for terminal ports)
• Enable Dedicated Printer (for printer ports)
• Enable Automatic Connection (for modem ports)
• Enable Hardware Handshake (for DTC 72MX and DTC 16TN)
• Enable Keep Alive (applies to version A.14.2C and later versions)
• Enable Flow Control (applies to version A.14.2C and later versions)
• Enable Port Config Saved In Binary (applies to version A.14.2C and later
versions)