manualshive.com logo in svg

HP 8719ES, Reference Manual

The HP 8719ES Reference Manual is a comprehensive user's guide for this exceptional product. It is available for free download at manualshive.com, offering valuable insights into maximizing the potential of your HP 8719ES. Equip yourself with this essential manual to unlock the full capabilities of your equipment.

Share
Download
background image

9-11

Understanding the CITIfile Data Format

CITIfile Keywords

SEG_LIST
_BEGIN

SEG_LIST_BEGIN indicates that a list of segments for the independent
variable follow. Format for the segments is: [segment type] [start] [stop]
[number of points]. The current implementation only supports a single
segment. If there is more than one segment, the VAR_LIST_BEGIN
construct is used. CITIfile revision A.01.00 supports only the SEG (linear
segment) segment type.

SEG_LIST
_END

SEG_LIST_END defines the end of a list of independent variable
segments.

VAR_LIST
_BEGIN

VAR_LIST_BEGIN indicates that a list of the values for the independent
variable (declared in the VAR statement) follow. Only the MAG format is
supported in revision A.01.00.

VAR_LIST
_END

VAR_LIST_END defines the end of a list of values for the independent
variable.

DATA

DATA S[1,1] RI defines the name of an array of data that will be read later
in the current CITIfile package, and the format that the data will be in.
Multiple arrays of data are supported by using standard array indexing.
Versions A.01.00 and A.01.01 of CITIfile only support the RI (real and
imaginary) format, and a maximum of two array indexes. Commonly used
array names include the following: "S" for "S parameter" Example: S[2,1]
"E" for "Error term" Example: E[1] "USER" for "User parameter" Example:
USER[1] "VOLTAGE" Example: VOLTAGE[1] "VOLTAGE_RATIO" for a
ratio of Example: VOLTAGE_RATIO[1,0] two voltages (A/R).

Summary of Contents for 8719ES




























































































































































































































































































Reviews:

No comments

Related manuals for 8719ES

UEi MM100 Instruction Manual preview
MM100
Brand: UEi Pages: 4
Valeport 803 Operating Manual preview
803
Brand: Valeport Pages: 25
ACECO FC2002 Quick Start Manual preview
FC2002
Brand: ACECO Pages: 2
Kawai EP3 Owner'S Manual preview
EP3
Brand: Kawai Pages: 66
Bartec VOLUTANK Petro 3003 Quick Manual preview
VOLUTANK Petro 3003
Brand: Bartec Pages: 10
Yamaha Electone Stagea ELS-01C Owner'S Manual preview
Electone Stagea ELS-01C
Brand: Yamaha Pages: 248
Bamo BAMOFLONIC Instruction Manual preview
BAMOFLONIC
Brand: Bamo Pages: 17
PCB Piezotronics 356A03 Installation And Operating Manual preview
356A03
Brand: PCB Piezotronics Pages: 16
Spectrum Techniques fieldscout TDR 100 Product Manual preview
fieldscout TDR 100
Brand: Spectrum Techniques Pages: 20
Johnson & Associates GSM-500 Operation & Maintenance Manual preview
GSM-500
Brand: Johnson & Associates Pages: 33
PCE Health and Fitness PCE-TG1XX Manual preview
PCE-TG1XX
Brand: PCE Health and Fitness Pages: 11
Parker SensoControl Serviceman SCM-150 Series Operating Instructions Manual preview
SensoControl Serviceman SCM-150 Series
Brand: Parker Pages: 39
RS PRO RS-136 Instruction Manual preview
RS-136
Brand: RS PRO Pages: 44
FM Marin Gobius 4 Waste Installation Manual preview
Gobius 4 Waste
Brand: FM Marin Pages: 8
ThermoFisher Scientific Thermo Scientific iCE 3000 Series Pre-Installation Manual preview
Thermo Scientific iCE 3000 Series
Brand: ThermoFisher Scientific Pages: 42
Teledyne 3000ZA Operating Instructions Manual preview
3000ZA
Brand: Teledyne Pages: 81
HANLA HGS-100 Technical Manual preview
HGS-100
Brand: HANLA Pages: 12
Farnell MarMonix MSL-765 User Manual preview
MarMonix MSL-765
Brand: Farnell Pages: 15

Brands by name

Popular brands

Load more brands