manualshive.com logo in svg

HP 8719ES, Reference Manual, Page: 170 / 283

Share
Download
HP 8719ES Reference Manual Download Page 170

5-43

Hardkey/Softkey Reference

Analyzer Functions

when displaying list values, prints the entire list in
monochrome. When displaying operating parameters,
prints all but the last page in monochrome. The data is
sent to the printer as ASCII text rather than as raster
graphics, which causes the printout to be faster.

sets the print command to default to a color printer. The
printer output is always in the analyzer default color
values. This command does not work with a black and
white printer.

prints the displayed measurement results in color.

is used to select the print colors menu.

sets the print command to default to a black and white
printer.

prints the displayed measurement results in black and
white.

prints any sequence currently in memory to a compatible
printer.

sets the serial port data transmission speed for prints.

sends a conditional form feed to the printer.

configures the port the analyzer will use to communicate
with the printer.

directs prints to the HP-IB port and sets the HP-IB
address the analyzer will use to communicate with the
printer.

configures the analyzer for a printer that has a parallel
(centronics) interface.

configures the analyzer for a printer that has a serial
(RS-232) interface.

sets the printer type to the DeskJet series.

sets the printer type to Epson compatible printers, which
support the Epson ESC/P2 printer control language.

sets the printer type to the LaserJet series.

sets the printer type to the PaintJet.

sets the printer type to the ThinkJet or QuietJet.

sets the power level directly from the power DAC.

 PRINT ALL MONOCHROME

 PRINT: COLOR

 PRINT COLOR

 PRINT COLORS

 PRINT: MONOCHROME

 PRINT MONOCHROME

 PRINT SEQUENCE

 PRINTER BAUD RATE

 PRINTER FORM FEED

 PRINTER PORT

PRNTR PORT HPIB

PRNTR PORT PARALLEL

PRNTR PORT SERIAL

 PRNTR TYPE [DESKJET]

 PRNTR TYPE [EPSON-P2]

 PRNTR TYPE [LASERJET]

 PRNTR TYPE [PAINTJET]

 PRNTR TYPE [THINKJET]

 PWR DAC on OFF

Summary of Contents for 8719ES




























































































































































































































































































Reviews:

No comments