4.
Press straight down on the two green thumb tabs inside the chassis
(1)
and rotate the expansion
card retention latch up
(2)
.
Figure 6-18
Opening the Expansion Slot Retainer
5.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE:
Before removing an installed expansion card, disconnect any cables that may be
attached to the expansion card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate
expansion slot cover on the back of the chassis. Lift the expansion slot cover from the
expansion slot.
Figure 6-19
Removing an Expansion Slot Cover
Expansion Cards
53
