manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 94

7–20

Getting Started

Finding Help & Support

Internet takes too long to 
download Web sites.

Modem is not set up 
properly.

Verify that the correct modem speed and COM port 
are selected:

1. Click 

Start

, and then click 

Control Panel

. 

2. Click 

Printers and Other Hardware

.

3. Click 

Phone and Modem Options

.

4. Select the 

Modems

 tab, and then click the 

Properties

 button.

5. Under 

Device status

, verify the modem is working 

properly.

6. Under 

Device usage

, verify the modem is enabled.

7. If there are further problems, click the 

Troubleshoot

 button and follow the onscreen 

instructions.

Internet Access 

(Continued)

Symptom

Problem

Solution

sa3gsap.book  Page 20  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands