HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 86

Page: 86 / 146

7–12

Getting Started

Finding Help & Support

Diskette drive cannot
read a diskette.

Diskette is not formatted.

To format the diskette:

1. On the Windows desktop, click

Start

and then

click

My Computer

2. Right-click the

3½ Floppy (A:)

icon.

3. Select

Format

from the pop-up menu.

4. Select the desired options, and click

Start

begin formatting the diskette.

Diskette drive has failed.

Press the Help

button on the keyboard to access

the Compaq Help & Support Center, or refer to the

Warranty and Support Guide

for details.

Drive not found.

Internal cable is loose.

Press the Help

button on the keyboard to access

the Compaq Help & Support Center, or refer to the

Warranty and Support Guide

for details.

Diskette (Floppy) Drive

(Continued)

Symptom

Problem

Solution

sa3gsap.book Page 12 Tuesday, October 22, 2002 1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands