manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 35

Getting Started

3–23

Using the Computer

5. Click and drag the 

Screen Resolution

 slide 

control on the Settings tab to display less or 
more on your screen.

6. Click 

Apply

.

7. Click 

OK

.

Using Speakers

Moving the slide toward 

Less

 increases 

the size of text on your screen. Moving 
the slide toward 

More

 decreases the 

size of text.

The stereo speakers set is a left-right, 
2-channel speaker system, and may be 
passive (no power button) or active (power 
button). A multi-channel audio speakers 
system is an active system with more than 
2-channels, and may include a subwoofer. 
For example, a 5.1 speakers system, 
referred to as a 6-channel speakers system, 
uses two front speakers (left-right), two rear 
speakers (left-right), a center speaker, and 
a subwoofer.

sa3gsap.book  Page 23  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands