HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 83

Page: 83 / 146

Getting Started

7–9

Finding Help & Support

Diskette (Floppy) Drive

Symptom

Problem

Solution

Unable to read the diskette
(floppy disk).

A non-formatted diskette
has been inserted.

To format the diskette:

1. On the Windows desktop, click

Start

and then

click

My Computer

2. Right-click the

3½ Floppy (A:)

icon.

3. Select

Format

from the pop-up menu.

4. Select the desired options, and click

Start

begin formatting the diskette.

Diskette is damaged.

Replace the diskette with a new one.

Invalid system disk

message is displayed.

A diskette has been left
in the drive.

When drive activity stops, remove the diskette and
press the Spacebar. The computer should start up.

Diskette error has occurred.

Restart your computer by pressing the Power button.

sa3gsap.book Page 9 Tuesday, October 22, 2002 1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands