manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 27

Getting Started

3–15

Using the Computer

If you wish, you can switch the functions of the 
left and right buttons of a mouse. 

To Modify Mouse Buttons

1. Click the 

Start

 button from the Windows 

taskbar.

2. Click 

Control Panel

.

3. Click 

Printers and Other Hardware

.

4. Click 

Mouse

.

5. Check “Switch primary and secondary 

buttons” on the 

Buttons

 tab.

6. Click 

OK 

to apply the changes.

Using the Scroll Mouse

The mouse directs the cursor on the Windows 
desktop. Use the mouse to move quickly through 
a document or Web site.

Moving through a document or Web site with 
the scroll wheel is faster than using the scroll bar. 
You can use the scroll wheel to:

■

Scroll forward or backward through a 
document or Web site by turning the scroll 
wheel forward or backward.

■

Autoscroll by pressing down on the scroll 
wheel until it clicks (you will see an autoscroll 
icon on your desktop). Move the mouse 
vertically, horizontally, or diagonally to scroll 
in the desired direction. The farther you move 

sa3gsap.book  Page 15  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands