manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 39

Getting Started

3–27

Using the Computer

3. Click the 

Audio

 tab.

4. Click the option for the number of speakers 

that matches your multi-channel speaker 
system.

5. Click 

OK

.

To use the microphone with 
multi-channel audio:

The multi-channel speaker system connects to the 
PC using the Microphone, Audio (Line) In, and 
Audio (Line) Out connectors on the back of the PC. 

To use the back microphone connector, you must 
disconnect your multi-channel speakers system and 
select 2 channel audio setup. To change the audio 
configuration, see “To configure multi-channel 
audio output for speakers configuration:” 
on page 3–26.

If you want to play a stereo DVD, repeat 
these steps (1 through 5) and change the 
audio properties for WinDVD to match the 
DVD output.

sa3gsap.book  Page 27  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands