HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 37

Page: 37 / 146

Getting Started

3–25

Using the Computer

To confirm that your PC has
multi-channel audio:

1. Click

Start

on the taskbar.

2. Choose

All Programs

. If you see the

Multi-channel Sound Manager

folder in

the All Programs menu, your PC has the
multi-channel option.

To connect your multi-channel speaker
system to the PC:

1. Turn off the PC.

2. Connect the three audio cable plugs from

the speaker system to the connectors on the
back of the PC (see the table).

3. Turn on the PC.

4. Turn on your speaker system.

5. Configure the multi-channel audio output;

refer to the next procedure.

Connect speaker

channels (plugs)

To PC back

connector

Front speakers

Audio (Line) Out
(lime-green)

Rear speakers

Audio (Line) In (blue)

Center/subwoofer
speakers

Mic-1 (pink)

sa3gsap.book Page 25 Tuesday, October 22, 2002 1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Search results

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM

Reviews:

Brands by name

Popular brands