manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 45

Getting Started

3–33

Using the Computer

Hibernation Mode

When the computer is in hibernation mode, it 
saves everything that is in computer memory to the 
hard disk, turns off the monitor and the hard disk, 
and then turns itself off. When you turn on the 
computer again, everything (programs, folders, 
and documents) is restored to the screen.

To Manually Enter Hibernation Mode

1. Click 

Start

 on the taskbar.

2. Click 

Turn Off Computer

.

3. Press the Shift key on the keyboard, and click 

Hibernate

.

4. When you want to use the computer again 

after hibernation, press the Power button on 
the front of the PC.

If the computer does not work properly when you 
wake it from hibernation, restart the computer:

1. Click 

Start

 on the taskbar.

2. Click 

Turn Off Computer

.

3. Click 

Restart

.

If Hibernate is not present, you can set 
up your computer for hibernation; refer 
to “Automatic Standby or Hibernation 
Mode” on page 3–34.

sa3gsap.book  Page 33  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands