manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 70

6–10

Getting Started

Using Application Recovery and System Recovery

■

Full System Recovery: This recovery process 
erases and reformats the hard disk drive, 
creates a new hard disk partition, erases 
all added hard disk data, and then reinstalls 
the operating system. You must reinstall any 
software that was not installed on the computer 
at the factory.

To Start System Recovery

1. If the computer responds, back up all data files 

that you want to save onto removable media, 
such as CD-RW or diskette. Remove the 
backup CD or diskette from the PC.

2. Turn off the computer:

❏

If the computer responds, click 

Start

 on the 

taskbar, click 

Turn Off Computer

, and 

then click 

Turn Off

.

Or

❏

If the computer does not respond: Press 
and hold the Power button approximately 
5 seconds until the computer turns off.

3. Disconnect all peripheral devices from the 

PC except the monitor, the keyboard, and 
the mouse.

If your PC has a blank or corrupted hard 
disk, you are only able to choose the full 
system recovery option.

sa3gsap.book  Page 10  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands