manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 21

Getting Started

3–9

Using the Computer

To Remove a Disc

■

To remove the disc, press the Load/Eject 
button to open the drive.

Listening to Music

You can listen to music using any CD-ROM, 
CD-RW, DVD-ROM, DVD+RW/+R, or combo 
drive.

To Listen to Music

1. Insert a CD or DVD disc. 

2. Wait for the disc to start playing automatically. 

If the disc does not play automatically, follow 
the onscreen instructions.

3. When you are finished listening, press the 

Load/Eject button to eject the CD or DVD from 
the drive.

To Adjust the Volume

1. Click the 

Start

 button on the Windows 

taskbar.

2. Click 

Control Panel

.

3. Click 

Sounds, Speech, and Audio 

Devices

.

4. Click 

Adjust the System Volume

.

sa3gsap.book  Page 9  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands