manualshive.com logo in svg

HP 6430NX - Compaq Presario - 512 MB RAM, Getting Started

Share
Download
HP 6430NX - Compaq Presario - 512 MB RAM Getting Started Download Page 56

5–2

Getting Started

Maintaining the Computer

■

Make sure you have at least 3 inches (8 cm) of 
space between the top of the monitor and any 
cabinet.

■

Never block vents or air intake areas for the 
computer or monitor.

■

Never operate the computer with the cover or 
side panel removed.

■

Keep the computer away from excessive heat, 
cold, moisture, and direct sunlight. 

■

Keep liquids away from the computer and 
keyboard.

■

Turn off the computer before you:

❏

Wipe the exterior with soft, damp cloth

❏

Clean the air vents

Preventive Maintenance

Preventive maintenance is essential for keeping 
your computer in good working condition. A few 
basic tasks include:

■

Creating backup files

■

Deleting unwanted files

■

Defragmenting your hard drive

■

Running virus scan software

It is recommended that you back up files and 
defragment your hard drive at least monthly. 
If you use your computer a great deal, you may 
want to perform these tasks more frequently.

sa3gsap.book  Page 2  Tuesday, October 22, 2002  1:37 PM

Summary of Contents for 6430NX - Compaq Presario - 512 MB RAM



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands