HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch, User Manual

Page: 111 / 169

99
Directory management is automatically performed on the InfiniBand system, so do not include path
information for files on the chassis.
1. (Optional) If you are using In-Band Management, configure the ethernet management interface (if
you have not already done so).
2. Verify that you have a working ftp server connection, and that you have a user account on the ftp
server.
3. Enter the
copy
command in the privileged-execute mode with the source, destination, and FTP
user information.
Syntax :
Enter path,
user-name
and
password
information.
This information authenticates you to the server, which is specified in
source-IP-address
.
• Include the full path to the file.
• Set the file-system to
image
when copying image files.
Example:
4. Continue on to “Activate an Image” on page 100 to install the image.
Download From a TFTP Server
Use FTP to download new image files to the InfiniBand system. Uninstalled system-image files always
end with a
.img
extension.
Topspin-90> enable
Topspin-90# config
Topspin-90(config)# interface mgmt-ether
Topspin-90(config-if-mgmt-ethernet)#ip address 10.3.102.8. 255.255.0.0
Topspin-90(config-if-mgmt-ethernet)#gateway 10.3.0.1
Topspin-90(config-if-mgmt-ethernet)#no shutdown
Topspin-90(config-if-mgmt-ethernet)# exit
Topspin-90(config) # exit
$ftp 10.10.0.5
username:Example
password:xxxxxx
ftp>
Topspin-90> enable
Topspin-90# copy
ftp://
user-name:password@source-IP-address/source-image-file-path-name
image:destination-file-name
Topspin-90# copy
ftp://
bob:mypassword@10.0.0.5/Topspin-360-TopspinOS-1.1.3-build497.img
image:Topspin-360-TopspinOS-1.1.3-build497.img
*****************operation completed successfully
Topspin-90#