83
or
Example
•
View the subnet-prefix of the subnet manager.
•
View the Global Unique Identifier
(guid)
of the subnet manager.
•
View the
priority
for the subnet manager. The priority number of a subnet manager tells the subnet
manager how to interact with other subnet managers; the highest priority subnet manager becomes
the master.
•
View the
smKey
. The smkey is a 64-bit subnet management key that is assigned to the subnet
manager.
•
View the
admin-status
of the subnet manager. The Administrative Status value is enable or
disable. Disabling a subnet manager places it in an inactive state but leaves it intact in the
configuration. The default is enable.
•
View the
oper
-
status
of the subnet manager. The status is determined by self-detection. The values
are notActive, discovering, or Master. As there is only one subnet manager running on the fabric,
the sm that is running is always designated the master.
•
notActive indicates the subnet manager has not been enabled or has been disabled.
•
discovering indicates the subnet manager is sweeping the fabric.
•
View the
act-count
of the subnet manager. The Activity counter increments each time the subnet
manager issues a subnet management packet (SMP) or performs other management activities.
•
View the
status
of the subnet manager. The Status may be active or inactive. If active, it is actively
managing subnets. If inactive, it is not managing subnets.
•
View the
Sweep Interval
of the subnet manager. The sweep interval indicates the rate (in seconds)
at which the subnet manager sweeps the fabric for any network changes.
The default is 10 seconds.
•
View the
Response Timeout
of the subnet manager. This is the maximum time allowed between
the port reception of a subnet management packet and the transmission of the associated response.
The default is 2,000 microseconds.
Changing the Subnet Manager Configurations
Change the Priority of a SM
The priority number of a subnet manager tells the subnet manager how to interact with other subnet
managers; the highest priority subnet manager becomes the master. Because multiple subnet managers
Topspin-360# show ib sm config subnet-prefix all
================================================================================
Subnet Manager Information
================================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
guid : 00:05:ad:00:00:01:38:82
priority : 10
sm-key : 00:00:00:00:00:00:00:00
admin-status : enable
oper-status : master
act-count : 216655
status : active
sweep-interval : 10
response-timeout : 400
Summary of Contents for 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch
