HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch, User Manual

Page: 96 / 169

84
can run on the system and other SMs may run in your IB network, the priority attribute identifies the
master SM.
The integer must be between 0 and 15, with the default being 0.
1. Enter the
ib sm subnet-prefix prefix priority sm-priority command.
Example
Change the Sweep Interval of a SM
The sweep interval indicates the rate (in seconds) at which the subnet manager sweeps the fabric for any
network changes.
The default is 10 seconds.
1. Enter the
ib sm subnet-prefix prefix sweep-interval value command.
Example
Change the Response Timeout of a SM
The response timeout is the maximum time allowed between the port reception of a subnet management
packet and the transmission of the associated response.
The default is 2,000 microseconds.
1. Enter the
ib sm subnet-prefix prefix response time-out value command.
Example
Managing Synchronization Between SMs
You can configure how database synchronization is performed between the master-Subnet Manager
(SM) and one or more standby-SMs. Refer to
“Subnet Manager Hot Standby” on page 5 .
Enable/Disable Database Synchronization
Database synchronization is not enabled by default.
1. Enter the
ib sm db-sync subnet-prefix < prefix > enable command.
Example
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00 priority 10
Topspin-360(config)#
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00 sweep-interval
10
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
response-timeout 2000
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm db-sync subnet-prefix fe:80:00:00:00:00:00:00 enable