HP 3100 v2 Series Command Reference Manual Download Page 223

Page: 223 / 239

216

Field Description

Reg-state

Registration state of the attribute declared by remote participants on the local
participant. The state can be IN, LV, or MT:

•

—Registered.

•

—Previously registered, but now being timed out.

•

—Not registered.

display mvrp statistics

Syntax

display mvrp statistics

[

interface interface-list

] [

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Parameters

interface interface-list

: Specifies an Ethernet interface list in the form of

interface-list

{

interface-type interface-number1

[

interface-type interface-number2

] }&<1-10>, where

interface-type

interface-number

specifies an interface by its type and number and &<1-10> indicates

that you can specify up to 10 interfaces or interface ranges. If this option is not specified, this
command displays MVRP statistics of all MVRP-enabled trunk ports.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use

display mvrp statistics

to display MVRP statistics.

Examples

# Display MVRP statistics of all MVRP-enabled ports.

<Sysname> display mvrp statistics

----[Ethernet1/0/1]----

Failed Registrations : 1

Last PDU Origin : 000f-e200-0010

Frames Received : 201

New Event Received : 0

JoinIn Event Received : 1167

In Event Received : 0

JoinMt Event Received : 22387

Mt Event Received : 31

Leave Event Received : 210

LeaveAll Event Received : 63

Summary of Contents for 3100 v2 Series
















































































































































































































































Search results

Summary of Contents for 3100 v2 Series

Reviews:

Related manuals for 3100 v2 Series

Brands by name

Popular brands

HP 3100 v2 Series, Command Reference Manual

Search results

Summary of Contents for 3100 v2 Series

Reviews:

Related manuals for 3100 v2 Series

Brands by name

Popular brands