manualshive.com logo in svg

HP 3100 v2 Series, Command Reference Manual

The HP 3100 v2 Series offers exceptional performance and reliability, and to help maximize your experience, we provide a comprehensive Command Reference Manual. This manual can be easily downloaded for free from our website, ensuring you have the necessary guidance to optimize your product usage.

Share
Download
background image

16 

display storm-constrain 

Syntax 

display storm-constrain 

[

 broadcast 

|

 multicast 

|

 unicast 

]

 

[

 interface interface-type

 

interface-number

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

View 

Any view 

Default level 

1: Monitor level 

Parameters 

broadcast

: Displays broadcast storm control settings and statistics. 

multicast

: Displays multicast storm control settings and statistics.

 

unicast

: Displays unknown unicast storm control settings and statistics.

 

interface  interface-type interface-number

: Specifies an interface by its type and number with the 

interface-type interface-number

 argument. 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Description 

Use 

display storm-constrain

 to display storm control settings and statistics. 

If you specify no argument or keyword, this command displays all storm control settings on all storm 
control-enabled interfaces. 

When the port forwarding state transition counter (SwiNum) reaches 65535, it automatically wraps 
back to 0. 

Examples 

# Display the storm control settings on all storm control-enabled ports. 

<Sysname> display storm-constrain 

Abbreviation: BC - broadcast; MC - multicast; UC - unicast 

 Flow Statistic Interval: 10(second) 

PortName      Type LowerLimit UpperLimit CtrMode  Status  Trap Log SwiNum Unit 

------------------------------------------------------------------------------ 

Eth1/0/1       MC  100        200        shutdown  control  off  on   10    pps 

Table 8 Command output 

Field Description 

Flow Statistic Interval 

Traffic polling interval of the storm control module. 

PortName 

Abbreviated port name. 

StormType 

Type of traffic subjected to storm control. Options include broadcast, 
multicast and unknown unicast. 

LowerLimit 

Lower storm control threshold, in pps, kbps, or percentage. 

Summary of Contents for 3100 v2 Series
















































































































































































































































Reviews:

No comments

Related manuals for 3100 v2 Series

D-Link DKVM-IP1 Manual preview
DKVM-IP1
Brand: D-Link Pages: 73
Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
H3C Mini Series Manual preview
Mini Series
Brand: H3C Pages: 17
JDS Uniphase SCG Series User Manual preview
SCG Series
Brand: JDS Uniphase Pages: 37
Panduit ATLONA Omega AT-OME-MS52W Manual preview
ATLONA Omega AT-OME-MS52W
Brand: Panduit Pages: 123
Panduit Atlona AT-OME-MS42 Manual preview
Atlona AT-OME-MS42
Brand: Panduit Pages: 86
B&B Electronics EIR405-SFP-T User Manual preview
EIR405-SFP-T
Brand: B&B Electronics Pages: 22
TAXON TOOLS Scart Switch Manual preview
Scart Switch
Brand: TAXON TOOLS Pages: 9
Datavideo KMU-200 Instruction Manual preview
KMU-200
Brand: Datavideo Pages: 64
Radio Systems HUB16-DC Technical Manual preview
HUB16-DC
Brand: Radio Systems Pages: 19
3onedata IES2008 Quick Installation Manual preview
IES2008
Brand: 3onedata Pages: 2
Black Box LB9007A-SC-R Installation preview
LB9007A-SC-R
Brand: Black Box Pages: 2
NewStar NS-211KA User Manual preview
NS-211KA
Brand: NewStar Pages: 10
3Com 3C16895 Installation Manual preview
3C16895
Brand: 3Com Pages: 74
NeoPro DOC42 Integrator Manual preview
DOC42
Brand: NeoPro Pages: 36
Eaton Cutler-Hammer RTHMFDA20100WSU Instructions Manual preview
Cutler-Hammer RTHMFDA20100WSU
Brand: Eaton Pages: 28
Eaton LS ZB Series Original Operating Instructions preview
LS ZB Series
Brand: Eaton Pages: 12
Watt Stopper WI-200 Installation Instructions preview
WI-200
Brand: Watt Stopper Pages: 2

Brands by name

Popular brands

Load more brands