147
Parameters
vlan-id
: Specifies a VLAN ID, in the range of 1 to 4094. Verify that the VLAN specified by the VLAN ID
already exists.
Description
Use
port access vlan
to assign the access ports to the specified VLAN.
Use
undo port access vlan
to restore the default.
By default, all access ports belong to VLAN 1.
The configuration made in Layer 2 Ethernet interface view, applies only to the port.
The configuration made in port group view applies to all ports in the port group.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and
its aggregation member ports.
•
If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
•
If the system fails to apply the configuration to an aggregation member port, it skips the port and
moves to the next member port.
Examples
# Assign Ethernet 1/0/1 to VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port access vlan 3
# Assign Layer 2 aggregate interface Bridge-Aggregation 1 and its member ports to VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port access vlan 3
port hybrid pvid
Syntax
port hybrid pvid vlan vlan-id
undo port hybrid pvid
View
Layer 2 Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan-id
: Specifies a VLAN ID, in the range of 1 to 4094.
Description
Use
port hybrid pvid
to configure the PVID of the hybrid port.
Use
undo port hybrid pvid
to restore the default.