HP 3100 v2 Series Command Reference Manual Download Page 14

Page: 14 / 239

View

Any view

Default level

1: Monitor level

Parameters

interface-type

: Specifies an interface type.

interface-number

: Specifies an interface number.

brief

: Displays brief interface information. If you do not specify this keyword, the command displays

detailed interface information.

down

: Displays information about interfaces in down state and the causes. If you do not specify this

keyword, this command displays information about interfaces in all states.

description

: Displays complete interface descriptions. If you do not specify this keyword, the

command displays only the first 27 characters of each interface description.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use

display interface

to display Ethernet interface information.

If no interface type is specified, this command displays information about all interfaces.

If an interface type is specified but no interface number is specified, this command displays
information about all interfaces of that type.

Related commands:

interface

Examples

# Display detailed information about interface Ethernet 1/0/1.

<Sysname>display interface ethernet 1/0/1

Ethernet1/0/1 current state: DOWN

IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc00-9877

Description: Ethernet1/0/1 Interface

Loopback is not set

Media type is twisted pair

Port hardware type is 100_BASE_T

Unknown-speed mode, unknown-duplex mode

Link speed type is autonegotiation, link duplex type is autonegotiation

Flow-control is not enabled

The Maximum Frame Length is 2048

Broadcast MAX-ratio: 100%

Unicast MAX-ratio: 100%

Multicast MAX-ratio: 100%

PVID: 1

Mdi type: auto

Port link-type: access

Summary of Contents for 3100 v2 Series
















































































































































































































































Search results

Summary of Contents for 3100 v2 Series

Reviews:

Brands by name

Popular brands

HP 3100 v2 Series, Command Reference Manual

Search results

Summary of Contents for 3100 v2 Series

Reviews:

Brands by name

Popular brands