HP 3100 v2 Series Command Reference Manual Download Page 152

Page: 152 / 239

145

Port-based VLAN configuration commands

display port

Syntax

display port

{

hybrid

trunk

} [

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Parameters

hybrid

: Displays hybrid ports.

trunk

: Displays trunk ports.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use

display port

to display information about the hybrid or trunk ports on the device, including the

port names, PVIDs, and allowed VLAN IDs.

Examples

# Display information about the hybrid ports in the system.

<Sysname> display port hybrid

Interface PVID VLAN passing

Eth1/0/4 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,

2555-2558, 3000, 4000

Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,

150-160, 200, 255, 286, 300-302

# Display information about the trunk ports in the system.

<Sysname> display port trunk

Interface PVID VLAN passing

Eth1/0/8 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,

555, 600-611, 1000, 2006-2008

Table 33 Command output

Field Description

Interface Port

name

PVID

PVID of the port

VLAN passing

VLANs for which the port allows packets to pass through

Tagged

VLANs for which the port sends packets without removing VLAN tags

Summary of Contents for 3100 v2 Series
















































































































































































































































Search results

Summary of Contents for 3100 v2 Series

Reviews:

Related manuals for 3100 v2 Series

Brands by name

Popular brands

HP 3100 v2 Series, Command Reference Manual

Search results

Summary of Contents for 3100 v2 Series

Reviews:

Related manuals for 3100 v2 Series

Brands by name

Popular brands