ENWW
HP Jetdirect Configuration Page Messages 73
LAN
ERROR-TRANSMITTER
OFF
There may be a problem with your network cabling or the
HP Jetdirect print server. Check the cabling and
connectors on your Ethernet network. If you cannot find a
problem with your network cabling, run the power-on
self-test: turn the print server off, then on again. If the error
persists, there is a problem with the HP Jetdirect print
server.
LAN
ERROR-UNDERFLOW
There may be a problem with your network cabling or the
HP Jetdirect print server. Check the cabling and
connectors on your network. If you cannot find a problem
with your network cabling, run the power-on self-test: turn
the print server off, then on again. If the error persists,
there is a problem with the HP Jetdirect print server.
LAN ERROR-WIRE
FAULT
There is a problem with the network cabling. Check the
cabling between the printer and the network.
LATE COLLISION
ERROR
Check the network topology, verify all cable segments, and
make sure no segment is too long.
LOSS OF CARRIER
ERROR
Check the network connections. If the connections are
intact, run the power-on self-test: turn the print server off,
then on again. If the error persists, replace the
HP Jetdirect print server.
MEMORY ERROR
Run the power-on self-test: turn the print server off,
then on again. If the error persists, replace the
HP Jetdirect print server.
NDS AUTHENTICATION
ERROR
Unable to log onto the NetWare directory tree. Make sure
that the print server object is defined in the directory at the
correct context.
NDS CONNECTION
STATE ERROR
The HP Jetdirect print server cannot change the NDS
connection state. Check licenses on the spooling server.
NDS ERR: CANNOT
READ Q HOST
Cannot locate the file server on the network. The server
may not be running at this time or a communications
problem may exist.
NDS ERR: CHANGE
PSSWD FAILED
Cannot modify the print server password to the value
expected by the HP Jetdirect print server.
NDS ERR: EXCEEDS
MAX SERVERS
More queues were assigned than the HP Jetdirect print
server can handle. Remove one or more print queues from
the list to be serviced by Queue Server Mode.
NDS ERR: INVALID
SRVR VERS
The current version of the NetWare file server is not
supported.
NDS ERR: MAX PRINT
OBJECTS
Too many printer objects are assigned to the print server
object. Reduce the number of printer objects assigned to
the print server using NWADMIN.
Table 7.2
General HP Jetdirect Messages (5 of 10)
Message
Description