22 TCP/IP Configuration
ENWW
A colon (:) indicates the end of a field, and a backslash (\) indicates
that the entry is continued on the next line. Spaces are not allowed
between the characters on a line. Names, such as host names, must
begin with a letter and can contain only letters, numbers, periods,
or hyphens.The underline character (_) is not allowed. Refer to your
system documentation or online help for more information.
TFTP Configuration File Entries
To provide additional configuration parameters for your HP
Jetdirect print server, such as SNMP (Simple Network
Management Protocol) or non-default settings, an additional
ha
The hardware address tag. The hardware (MAC) address
is the link-level, or station address of the HP Jetdirect print
server. It can be found on the HP Jetdirect configuration
page as the LAN HW ADDRESS. On HP Jetdirect
external print servers, it is printed on a label attached to
the print server.
ip
The IP address tag (required). This address will be the HP
Jetdirect print server’s IP address.
gw
The gateway IP address tag. This address identifies the
IP address of the default gateway (router) that the HP
Jetdirect
server will use for communications with other
subnets.
sm
The subnet mask tag. The subnet mask will be used by
the HP Jetdirect print server to identify the portions of an
IP address that specify the network/subnetwork number
and the host address.
lg
The syslog server’s IP address tag. It specifies the server
that the HP Jetdirectprint server sends syslog messages
to.
T144
A vendor-specific tag that specifies the relative path name
of the TFTP configuration file. Maximum length of the path
name is 33 characters. The path name must be in double
quotes (for example, “pathname”). On HP-UX systems,
/usr/tftpdir
is prepended to the path. For file format
information, refer to “TFTP Configuration File Entries“.
Table 3.1
Tags in the “bootptab” file (2 of 2)
