HP 300X - JetDirect Print Server Administrator'S Manual Download

Page: 51 / 102

ENWW

Configuring for LPD Printing 51

Select and enable

Other Network File and Print

Services

Click

Details

, and verify that

Print Services for Unix

enabled. If not, enable it.

Click

Okay

, and then

Next

2. Windows 2000: Open the

Printers

folder (from the Desktop,

click

Start

Settings

, and

Printers

Server 2003: Open the

Printers and Faxes

folder (from the

Desktop, click

Start

Printers and Faxes

3. Double-click

Add Printer

. From the Add Printer Wizard

welcome screen, click

Next

4. Select

Local printer

, and disable automatic detection for Plug

and Play printer installation. Click

Next

5. Choose

Create a new port

, and select

LPR Port

. Click

Next

6. In the

Add LPR compatible printer

window:

■

Enter the DNS name or IP address of the HP Jetdirect print
server.

■

Enter (in lower case)

raw

text

, or

auto

for the name of the

printer or print queue on the HP Jetdirect print server.

Then click

Note

The HP Jetdirect print server treats text files as
unformatted text or ASCII files. Files that are raw
are formatted files in PCL, PostScript, or HP-GL/2
printer languages.

For HP Jetdirect external print servers with three
ports, use

raw1

raw2

raw3

text1

text2

text3

auto1

auto2

auto3

to specify the port.

7. Select the Manufacturer and Printer model. (If necessary, click

Have Disk

and follow the instructions to install the printer

driver.) Click

Next

8. Choose to keep the existing driver, if prompted. Click

Next

9. Enter a printer name, and choose whether this printer will be

the default printer. Click

Next

Summary of Contents for 300X - JetDirect Print Server







































































































Search results

Summary of Contents for 300X - JetDirect Print Server

Reviews:

Related manuals for 300X - JetDirect Print Server

Brands by name

Popular brands

HP 300X - JetDirect Print Server, Administrator'S Manual

Search results

Summary of Contents for 300X - JetDirect Print Server

Reviews:

Related manuals for 300X - JetDirect Print Server

Brands by name

Popular brands