HP 300X - JetDirect Print Server Administrator'S Manual Download

Page: 56 / 102

56 FTP Printing

ENWW

Commands

Table 5.1 summarizes commands available to the user during an
FTP printing session.

Table 5.1

User Commands for HP Jetdirect FTP Server

Command

Description

user <username>

specifies a user. Any user will be

accepted and can print to the selected port.

cd <port#>

<port#>

selects a port number for printing. For

HP Jetdirect single-port print servers, only port1 is
available. For multiport print servers, specify port1
(default), port2, or port3.

cd/

specifies the root directory of the HP Jetdirect FTP

server.

quit

bye

terminates the FTP session with the

HP Jetdirect print server.

bye

dir

displays the contents of the current

directory. If this command is typed in the root
directory, a list of available ports for printing is
displayed. For multiport print servers, the available
ports for printing are PORT1 (default), PORT2, and
PORT3.

pwd

Displays the current directory or the current Jetdirect
printing port.

put <filename>

specifies the file to send to the

selected HP Jetdirect print server port. For multiport
print servers, a different port can be specified in the
command:

put <filename> <port#>

bin

Configures an FTP binary (image) file transfer.

ascii

Configures an FTP ASCII file transfer. HP

Jetdirect

print servers support only non-print format control for
character transfers (standard values for spacing and
margins are used).

Ctrl-C

Press the Ctrl and C keyboard keys simultaneously
to abort the FTP service command and any transfer
of data. The data connection is closed.

rhelp

Displays the FTP commands supported.

Summary of Contents for 300X - JetDirect Print Server







































































































Search results

Summary of Contents for 300X - JetDirect Print Server

Reviews:

Related manuals for 300X - JetDirect Print Server

Brands by name

Popular brands

HP 300X - JetDirect Print Server, Administrator'S Manual

Search results

Summary of Contents for 300X - JetDirect Print Server

Reviews:

Related manuals for 300X - JetDirect Print Server

Brands by name

Popular brands