50 Configuring for LPD Printing
ENWW
2. If you have not previously installed the software:
■
Windows 2000/Server 2003: In the
Local Area Connection
Properties
window, click
Install
. In the
Select Network
Component Type
window, select
Protocol
and click
Add
to
add the
Internet Protocol (TCP/IP)
.
Follow the instructions on the screen.
3. Enter TCP/IP configuration values for the computer:
■
Windows 2000/Server 2003: On the
General
tab in the
Local
Area Connection Properties
window, select
Internet
Protocol (TCP/IP)
and click
Properties
.
If you are configuring a Windows server, type the IP address,
default gateway address, and subnet mask in the appropriate
spaces.
If you are configuring a client, check with your Network
Administrator to learn whether you should enable automatic
TCP/IP configuration or whether you should type a static IP
address, default gateway address, and subnet mask in the
appropriate spaces.
4. Click
OK
to exit
5. If prompted, exit Windows and restart your computer for the
changes to take effect.
Configuring a Network Printer for
Windows 2000/Server 2003 Systems
Set up the default printer by performing the following steps.
1. Verify that the Print Services for Unix is installed (required for
LPR port availability):
a.
Windows 2000: Click
Start
,
Setup
, and
Control Panel
.
Double-click the
Network and Dial-up Connections
folder.
Server 2003: Click
Start
,
All Programs
,
Accessories
,
Communications
, and open the
Network Connections
folder.
b.
Click the
Advanced
menu and select
Optional
Networking Components
.
