9 of 61
Indesit
Company
Service Manual UK
English
REMOVING THE REFRIGERATOR & FREEZER FURNITURE
Removing the Fridge and Freezer Shelves
1.
Pull the shelf out until it reaches its stop point then lift the shelf from the front to remove it.
2.
NOTE: - For the easiest recommended removal of some fridge shelves and drawers, lift the front
end up to nearly a vertical position whilst pushing the fridge door fully open.
Removing the Crisper or Meat Drawer from the Fridge Compartment
1.
Slide the drawer out until it reaches its stop;
2.
With one hand underneath the drawer, lift from the front and pull it past the stops; the drawer will
come off the runners and can be pulled out further;
3.
To remove it completely, lift the front end up (rear end down) and turn and manoeuvre the drawer
out.
NOTE:
The fridge door may require pushing to its fully open position.
Crisper Moisture Control Device
•
Moving the slider to the far right opens the small vent, eliminating
humidity from the compartment. this setting is best for preserving
fruits and vegetables with skin.
•
Moving the slider to the far left closes the small vent, maintaining
humidity inside the compartment. This setting is best for preserving
salads and leaf vegetables.
Removing the Ice Storage Bucket / Container
Locate the handle inside the opening at the base of the container (right hand side). Pull the lever and lift
the container upwards and outwards (see Figs. A and B). To reposition it, rest the base of the container
on the ledge in the inner door and lower it into position.
Note:
Switch the icemaker off before removing
the container to prevent accidental discharge of ice cubes.
Fig. A
Fig. B
2010 DF MODELS
2011 NDF MODELS
