Hotpoint MSZ900DFUK, Service Information

Page: 42 / 61

42 of 61
Service Manual UK
Indesit Company
English
SERVICING & DISMANTLING INSTRUCTIONS
Before commencing any work refer to the Safety Notes at the beginning of this manual. All necessary
precautions must be taken to prevent damage to the premises and the appliance. The appliance must
be disconnected from the mains electricity supply. Where necessary, food and containers should be
removed and stored according to the customer requirements. Please ensure hygiene standards when
dealing with drinking water tubes and components.
A. FREEZER DOOR REMOVAL (Refer to section ZE on Page 49 water tube removal)
1. Remove the lower plinth/grille (2 screws).
2. Disconnect the water tube that enters the bottom of the freezer door from the in-line connector.
Note: The water feed pipe is removable (See section ZA).
3. Unscrew the top hinge cover (1 hex head screw). Unhook front end of hinge cover from hinge to
remove.
4. Disconnect the 6-pin and 2-pin wiring connectors.
5. Remove 3 hex head screws securing the hinge, whilst supporting the door.
6. Ease the door from the cabinet and lift from the lower hinge without damaging the water tube.
B. FRIDGE DOOR REMOVAL
1. Remove the lower plinth/grille (2 screws).
2. Remove the top hinge cover (1 hex head screw). Unhook front end of hinge cover from hinge to
remove.
3. Remove 3 hex head screws securing the hinge, whilst supporting the door.
4. Ease the door from the cabinet and lift from the lower hinge.
C. DOOR ALIGNMENT/ADJUSTMENT
1. Remove the top hinge cover (1 hex head screw).
2. Loosen the 3 hex head screws securing the hinge.
3. Adjust the alignment using the small adjustment screw.
4. Tighten the 3 hex head screws to secure the hinge.
D. DOOR HANDLES - 2010 DF MODELS
1. Remove the single screws securing the handle end cap mouldings at each end.
2. Remove the end cap mouldings from the tubular handle grip. These are very tight.
DA. DOOR HANDLES - 2011 NDF MODELS
1. Remove the screw on the top of the handle.
2. Lift up the plastic support of the handle and pull the handle and support forward.