5 of 61
Indesit
Company
Service Manual UK
English
MODEL INTRODUCTION
The models included in this manual are 1774 mm high Side by Side fridge and freezer, one
compressor Frost Free appliances. There are two different ranges of the same model, the first range
was first introduced during March 2010 and the second range during September 2011. All models are
similar with regard to the furniture design, refer to Technical Specification Pages 6 and 7 for the
models, colour variants and specifications. The two ranges are referred to in this manual as either
2010 DF Models or 2011 NDF models. Where no specific range is noted, the information will be
generic for both ranges.
Interior:
The interior of the fridge has safety glass shelves, one meat drawer (chiller) and one humidity
controlled salad bin (crisper) with a glass cover. The door has two deep shelves, a dairy shelf with a lid
and a lower bottle shelf.
The interior of the freezer section has two drawers of varying sizes and two safety glass shelves of
varying sizes. The door has two commodity shelves and an ice storage bucket.
The interior differences between the DF and NDF model are shown below:
MSZ900DF, MSZ902DF and MSZ906DF
(2010 DF Models):
1.
The Icemaker (with blue rake) is located at the top inside section of the freezer compartment.
2.
Has two roller wheels at the rear and two wheels and two adjustable feet at the front.
MSZ900NDF, MSZ902NDF and MSZ906NDF
(2011 NDF Models)
1.
Sankyo IDI2 (In-Door-Ice) Icemaker is located in the freezer door above the ice storage bucket.
2.
A new upper hinge with “cut-out” for a door removal without removing the connectors and modified
top connectors with pin lock system.
3.
New water piping guidance for the ice maker. Both pipes are now located in the base of the
appliance. Blue pipe for the ice-maker. Transparent pipe for the water.
4.
Has two feet at the rear and two feet at front.
5.
Has an ice maker fill tube heater.
6.
LED light in the water dispensing area.
The appliance is 'frost free' design so defrosting is automatic.
The digital display interface module (7 ~ segment LED) is mounted in the front of the freezer door with
the drinks dispenser, the fast freeze button and ice maker controls are also mounted in the same area.
The fridge and freezer temperature settings are adjusted by selecting the + / - buttons next to the
relevant temperature display window. All functions are monitored and actioned by the power module
mounted at the rear of the appliance within the compressor compartment.
The climate class is N / ST signifying that it is designed to operate in ambient temperatures between
+16°C to +38°C.
As with many refrigeration appliances, it is important that it is installed and operated within the
recommended ambient temperature range and that there is adequate ventilation.
All appliances equipped with an automatic ice-maker and water dispenser must be connected to a
water supply that only delivers drinking water. See Specification page for pressure requirements.