HotBrick Network Solutions
Data – Policy Configuration.
Policy Priority
This section identifies each policy
•
Policy Name List
– When adding a new Policy, ignore this list. To edit an
existing entry, select it from the list, and click the "Select" button. The data
fields will then be updated with data for the selected entry.
•
Policy Name
– Enter a suitable name. Generally, you should use the "Policy
Name" for the network traffic.
•
Source Address
– Define the source address of packets here. It has two
types like IP address or MAC address. If you select IP address, you can
define IP address range; otherwise define up to four MAC addresses.
•
Destination Address
– Define the destination address of packets here. The
explanation is as the same as above.
•
Protocol Type
– The field defines traffic packet type, i.e. IP,TCP and UDP.
•
Source Port
– Define the source port of packets here.
•
Destination Port
– Define the destination port of packets here.
•
Priority Queue
– It defines a packet if it meets all conditions defined above, it
will be serviced with some priority level.
Page 60
Summary of Contents for VPN 800/2
Page 1: ...Dual WAN Firewall Router VPN 800 2 User s Guide HotBrick Network Solutions ...
Page 2: ......
Page 55: ...HotBrick Network Solutions IPSec Global Setting Figure 6 1 IPSec Global Setting Page 51 ...
Page 57: ...HotBrick Network Solutions Policy Setup Policy Setup Figure 6 2 Policy Setup Page 53 ...
