HotBrick VPN 800/2 User Manual Download Page 39

Page: 39 / 89

HotBrick Network Solutions

Figure 4-6: Dynamic DNS

Settings – Dynamic DNS

Dynamic DNS
Service

Use this to Enable/Disable the Dynamic DNS feature, and select the required
service provider.

•

Disable

– Dynamic DNS is not used.

•

DNS4BIZ Hotbrick Premium

– It provides reliability for normal business

requirement.

•

DNS4BIZ Hotbrick Business

– Designed for VPN connections & mission

critical applications your DNS service is hosted on dedicated high-end servers
with 24/7 Monitoring to ensure the highest possible availability & reliability.

•

TZO

– Select this to use the TZO service (www.tzo.com). You must configure

the

TZO

section of this screen.

•

Standard Client

– Select this to use the standard service (from

www.dyndns.org or other provider). You must configure the

Standard Client

section of this screen.

•

3322(in China)

– This is available in China. It is similar to “Standard client”

•

User Defined DDNS Server

– This is the user define DDNS server. If the

DDNS other than TZO, dyndns.org and 3322.

Page 35

Summary of Contents for VPN 800/2


























































































Search results

Summary of Contents for VPN 800/2

Reviews:

Related manuals for VPN 800/2

Brands by name

Popular brands

HotBrick VPN 800/2, User Manual

Search results

Summary of Contents for VPN 800/2

Reviews:

Related manuals for VPN 800/2

Brands by name

Popular brands