HotBrick Network Solutions
9. Select
LAN & DHCP
from the menu. You will see a screen like the example below.
Figure 2-3: LAN & DHCP
10. Ensure these settings are suitable for your LAN:
•
The default settings are suitable for many situations.
•
See the following table for details of each setting.
11. Save your data, then go to
Step 2, Installing the
VPN 800/2 Firewall Router
in your LAN
.
Settings – LAN & DHCP
LAN IP
Configuration
IP address
- for the VPN 800/2 Firewall Router, as seen from the local LAN.
Use the default value unless the address is already in use or your LAN is
using a different IP address range. In the latter case, enter an unused IP
Address from within the range used by your LAN.
Subnet Mask
-The default value 255.255.255.0 is standard for small (class
"C") networks. For other networks, use the Subnet Mask for the LAN
segment to which the VPN 800/2 Firewall Router is attached (the same value
as the PCs on that LAN segment).
Page 10
Summary of Contents for VPN 800/2
Page 1: ...Dual WAN Firewall Router VPN 800 2 User s Guide HotBrick Network Solutions ...
Page 2: ......
Page 55: ...HotBrick Network Solutions IPSec Global Setting Figure 6 1 IPSec Global Setting Page 51 ...
Page 57: ...HotBrick Network Solutions Policy Setup Policy Setup Figure 6 2 Policy Setup Page 53 ...