HotBrick Network Solutions
7. Enter
admin
for the "User Name" and leave the "Password" blank.
•
The "User Name" is always
admin
•
You can and should set a password, using the following
Admin Password
screen.
No Response?
•
Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range 192.168.1.2 to
192.168.1.254, with a
Network Mask
of 255.255.255.0. See
Appendix B – Windows
TCP/IP Setup
for details.
•
Check that the VPN 800/2 Firewall Router is properly installed, LAN connection is OK,
and it is powered ON.
8. After the login, you will then see the
Admin Password
screen, as shown below.
Assign a password by entering it in the "Password" and "Verify Fields.
Figure 2-2: Home Screen (Admin Password) VPN 800 /2
Page 9
Summary of Contents for VPN 800/2
Page 1: ...Dual WAN Firewall Router VPN 800 2 User s Guide HotBrick Network Solutions ...
Page 2: ......
Page 55: ...HotBrick Network Solutions IPSec Global Setting Figure 6 1 IPSec Global Setting Page 51 ...
Page 57: ...HotBrick Network Solutions Policy Setup Policy Setup Figure 6 2 Policy Setup Page 53 ...