horsch Leeb 4 AX, Operating Instructions Manual

Page: 43 / 161

9. Plug the support on the square tubing for the
transport position.
10. Secure the support with bolt (c) in the trans-
port position.
c
Support in transport position
Move the support from the transport position
to the parking position:
1. Pull out the bolt (c).
2.
Pull off the support from the square tubing.
3. Plug the support on the square tubing for the
parking position.
4. Secure the support with bolt (c) in the park-
ing position.
5. Pull out the bolt (a).
6. Lower the support using the handle.
7. Secure the support with the bolt (a).
8. Unfold the crank handle.
9. Lower the support further with the crank
handle (b) until the coupling point is relieved
from any load.
10. Move the crank to the transport position
when not needed.
WARNING
Danger of accident when driving with the support
in lowered position!
Before starting transport travels you must make
sure that the support has been fully retracted!
Shut-off valve
A shut-off valve is installed on the front of the
machine to lock the hydraulic functions during
road travel. When driving in the field, the shut-
off valve must be moved to the correct position
to enable operation of the hydraulic functions.
Position of the shut-off valve during road travel
Position of the shut-off valve when driving in the field
WARNING
Danger of accident caused by the machine tip-
ping over!
¾
The shut-off valve must always be locked
during road travel!
39