Draining the fresh water tank
Connection of fresh water tank
The port of the fresh water tank is located to
the left of the illuviation valve. It serves to fill the
fresh water tank and also to drain the fresh wa-
ter. Remove the cap for drainage, open the ball
valve and let the water drain out. Now shut the
ball valve again and close the port with the cap.
WARNING
Danger of poisoning by contaminated water in
the fresh water tank!
Do not use the water of the fresh water tank as
drinking water!
Cleaning
WARNING
Danger of crushing, shearing, cutting, cutting
off, being caught, winding up, being pulled in
and impact caused by
¾
accidental lowering of lifted, unsecured ma-
chine parts
¾
accidental starting and unintended rolling of
the tractor/machine combination.
Secure both tractor and crop protection sprayer
against accidental starting and unintended roll-
ing before you start cleaning the machine.
Before starting cleaning work under the paral-
lelogram of the folded folding boom, check the
interlocking of the parallelogram.
WARNING
Danger of crushing, shearing, cutting, cutting off,
being caught, winding up, being pulled in and
impact caused by unprotected danger spots!
¾
Reattach all protective features previously
removed for cleaning the machine.
¾
Replace defective protective features with
new ones. Use only HORSCH original parts.
CAUTION
Contamination with crop protection agents.
Wear the personal protective outfit when clean
-
ing the crop protection sprayer!
¾
Pay particular attention to the brake, air and
hydraulic lines.
¾
Never use gasoline, benzene, petroleum or
mineral oils on brake, air and hydraulic oil
hoses.
¾
After cleaning, check all hydraulic lines for
leaks and loose connections.
104
Summary of Contents for Leeb 4 AX
