Cleaning the filters
Pressure filter
CAUTION
Spraying mixture running out! Wear personal
protective outfit!
The pressure filter is located below the external
control unit.
The pressure value on the folding boom is shown
on the terminal.
¾
Cleaning the filter daily.
pressure filter
1.
Switch off the folding boom circulation.
2. Close the ball valve for pressure output.
3.
Drain the filter housing. Open the valve for
this purpose.
4.
Unscrew the lid of the filter housing.
5.
Remove the filter and clean it. Collect the
deposits in a suitable tank and dispose of
properly.
6.
Insert the cleaned filter again and close the
filter housing with the lid. Close the shut-off
valve again.
Suction filter
CAUTION
Spraying mixture running out! Wear personal
protective outfit!
NOTE
¾
Clean the filter after suctioning contaminated
water.
¾
The suction filter should be cleaned daily
to prevent dirt deposits in it. In addition, the
pressure output should be rinsed.
The suction filter is located below the external
control unit.
Suction filter
1. Set the ball valve on the suction side to
Fill
spraying mixture container
.
2. Set the ball valve on the pressure side to
filling
.
3.
Drain the filter housing. Open the valve for
this purpose.
4.
Unscrew the lid of the filter housing.
5.
Remove the filter and clean/change it. Collect
the deposits in a suitable tank and dispose
of properly.
6.
Insert the cleaned/new filter again and close
the filter housing with the lid. Close the shut-
off valve again.
NOTE
Clean the thread of the filter housing if soiled.
106
Summary of Contents for Leeb 4 AX
