horiba LAQUA 2000 Series, Instruction Manual

Page: 83 / 108

Maintenance and Storage
65
■ Maintenance and Storage
This section describes maintenance and storage of the instrument and the electrodes that are
used with the instrument. To use them for a long period, perform the described maintenance
procedures appropriately.
● Contact for Maintenance
Please contact your dealer for the product maintenance.
● Maintenance and Storage of the Instrument
• If the instrument is dirty, wipe it gently with a soft dry cloth. If it is difficult to remove the dirt,
wipe it gently with a cloth moistened with alcohol.
• The instrument is made of solvent resistant materials but is not resistant to all chemicals.
Do not dip the instrument in strong acid or alkali solution, or wipe it with such solutions.
• Do not wipe the instrument with polishing powder or other abrasive compound.
● Environmental Conditions for Storage
• Temperature: 0°C to 45°C
• Humidity: under 80% relative humidity and free from condensation
Avoid the following conditions:
• Dusty place
• Strong vibration
• Direct sunlight
• Corrosive gas environment
• Close to an air-conditioner
• Direct wind