Hongqi HS7 Manual Download Page 95

Page: 95 / 401

It can store the information of seats, steering wheel, and exterior mirrors.

Seat memory setting

Set.the.memory.content:.After.adjusting.

the positions of the seats, the steering

wheel and the exterior mirrors, press

and hold any memory button for at least

3s until the instrument sounds prompt

tone, indicating the position information

and current key information has been

stored.in.this.button.
Call.up.the.memory.content:.Press.the.

memory button to make the seats, the

steering wheel and the exterior mirrors

automatically move to the stored

positions.in.this.button.
Each.key.corresponds.to.three.sets.of.

memory.positions.

■

Initialization setting

Set.the.engine.switch.to.IG.-.ON.position.and.press.key.1.and.3.to.carry.out.the.

initialization.setting..After.the.warning.speaker.rings.once,.the.initialization.succeeds.

3-3..Adjusting.the.Seats

Seat memory

Operating the Components

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands