Hongqi HS7 Manual Download Page 145

Page: 145 / 401

Perform the following steps to open the fuel tank lid.

■

Before.filling.fuel

Depress the brake pedal, place the shift lever to the P position, apply parking

brake, close the engine switch, and ensure that all doors and windows are

closed.

■

Opening.the.filler.cap

Step

Press.the.filler.cap.and.open.it.

The.filler.cap.can.only.be.opened.

when the entire vehicle lock is

unlocked.

Step

Turn counterclockwise to open the

fuel.tank.lid.

Step

Hang the fuel tank lid on the back of

the.filler.cap.

4-4..Filling.the.Fuel

Opening the fuel tank lid

Driving

142

143

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands