Hongqi HS7 Manual Download Page 153

Page: 153 / 401

Canceling and resuming ACC

Cancel

Depress the brake pedal or push the

cruise control handle forward to the

“CANCEL”.position.and.release.it.to.

cancel.the.cruise.control.

Resume

To resume the cruise control and

return to the set speed, push the

cruise.control.handle.up.to.the.“RES+”.

position.and.release.

■

Noise of ACC automatic deceleration

It.is.normal.that.noise.will.be.generated.when.the.ACC.is.applying.automatic.

deceleration.

■

Headway

The.default.headway.is.“Distance.4”.

■

Cruise control can be set when

●

ESC.function.is.activated.

●

Close.all.the.doors,.engine.compartment.cover.and.trunk.lid.

●

Driver.wears.the.belt.

●

The.shift.lever.is.in.D.

●

The.brake.pedal.is.not.depressed.by.the.driver.

●

The camera of the advanced driver assistance system is not blocked and has no

fault.

●

The.driving.mode.is.in.snow.mode.or.off-road.mode,.and.sand.mode.

■

Conditions for canceling ACC

●

The.driver.sets.the.cruise.control.lever.to.CANCEL.or.OFF.position.

●

The.driver.depress.down.the.pedal.or.press.and.hold.the.EPB.button.

●

Any.door.or.engine.compartment.cover.is.opened.during.the.driving.

●

The.driver.unfastens.the.seat.belt.during.the.driving.

●

The.driver.depressed.the.accelerator.pedal.for.more.than.1min.

●

When.there.is.insufficient.visibility.due.to.weather.conditions.

●

When.the.camera.is.exposed.to.the.sunlight.directly.

●

The.shift.lever.is.switched.to.the.position.except.D.

●

ESC/TCS/ABS.is.activated.

●

AEB/HDC/APA.is.activated.

●

The.driving.mode.is.switched.among.snow.mode,.off-road.mode,.and.sand.mode.

●

The.related.system.functions.are.turned.off.

4-5..Using.Other.Driving.Systems

Driving

150

151

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands