Hongqi HS7 Manual Download Page 28

Page: 28 / 401

Adjust.the.seat.belt.height.(front.seats)

Press the button for

Move upward
Move downward

Press and hold the adjustment

button, and move the height

adjuster upward and downward as

needed.until.you.hear.a.“click”.

Second-row central seat belt

Release

button

Fasten the seat belt

Push the latch plate into the buckle

until.a.“click”.sound.is.heard.

Loosen the seat belt

Press.the.release.button.

Seat.Belt.Pretensioner

When serious head-on collision occurs

to the vehicle, the pretensioner can

be activated to tighten the belt and

reduce the relaxation of the belt, and

thus provides better protection for the

front.passengers.

However, the pretensioners may not

be activated in the event of a minor

frontal impact, a side impact or a

rear.impact.

1-1..Safety.Instructions

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands