Hongqi HS7 Manual Download Page 158

Page: 158 / 401

■

Adjusting the vehicle speed

.Increasing.the.speed

Short.pushing:.Pushing.the.lever.once.

increases the speed by 5 km/h;

Long. pushing:. After. the. system.

confirms.the.long.pushing.is.valid,.the.

speed.continues.to.increase.by.1.km/h.

Decreasing the speed

Short.pushing:.Pushing.the.lever.once.

decreases the speed by 5 km/h;

Long. pushing:. After. the. system.

confirms.the.long.pushing.is.valid,.the.

speed continues to decrease by 1 km/

Note:..If.the.currently.set.vehicle.speed.

does not meet the multiple of 5

in the case of short pushing, the

speed will automatically become a

multiple.of.5.first.when.adjusting.

■

Setting the headway

Set the distance to the front vehicle

If. pulling. the. cruise. control. handle.

backward.to.“HEADWAY”.position,.the.

distance to the front vehicle can be

set.

There are four distance modes in the

system, which can be cycled by pulling

the control handle in the order of 4-3-

2-1-4.

The set cruise speed

SACC indicator lamp

(Gray)

(Gray):. The. system. is.

in standby and cannot meet the set

conditions.

(Gray)

(white):. The. system. is.

turned.on.for.the.adaptive.cruise.settings.

(White)

(White):. The. system.

is turned on for the advanced cruise

settings.

(Gray)

(green):.The.system.will.be.

operated and enter the adaptive cruise

status

(Green)

(green):.The.system.will.be.

operated and enter the adaptive cruise

status.for.the.advanced.cruise.settings.

.(Green).(Green):.system.working,.in.

cruise.state.

The set headway

The.default.headway.is.“Distance.4”.

4-5..Using.Other.Driving.Systems

156

157

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands