Hongqi HS7 Manual Download Page 140

Page: 140 / 401

The fog lamps improve visibility in difficult driving conditions, such as in the

rain and fog.

Closing
Turn on front fog lamps
Turn on both front and rear fog

lamps

■

Operating conditions of fog lamps

The.engine.switch.is.placed.in.the.IG-ON.mode,.and.the.headlamps.are.turned.on.

■

Corner lamp

When the vehicle is running at low speed with low beam on, if the driver operates

the turn lamp switch or steering wheel to turn, the corresponding side front fog lamp

will.automatically.illumine.to.help.the.driver..In.R.gear,.if.the.driver.operates.the.turn.

lamp switch, both sides front fog lamps will be on to enhance the lighting around the

vehicle.

4-3..Operating.the.Lamps.and.Wipers

Fog lamp switch

138

139

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands