Hongqi HS7 Manual Download Page 90

Page: 90 / 401

Forward-back adjustment of seats in the second row

Pull the left/right forward-back

adjusting lever of seats in the second

row.

Move the second row of seats back

and.forth.

Angle adjustment and folding of seat backs in the second row

Pull the left/right back release handles

of seats in the second row, and adjust

the angles of seat backs in the second

row.back.and.forth.

Fold.the.seat.backs.in.the.third.row.

Pull the left/right release handles of

seats in the third row, and fold the third

row.of.seats.

3-3..Adjusting.the.Seats

Rear seats

Summary of Contents for HS7


















































































































































































































































































































































































































Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands

Hongqi HS7, Manual

Search results

Summary of Contents for HS7

Reviews:

Related manuals for HS7

Brands by name

Popular brands