Honeywell Vocollect, Hardware Reference Manual

Page: 78 / 316

| Talkman A700 | 78
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can also be bolted to
a stationary surface, if desired.
The Claw Mount is also clamped to a stationary surface, but can be clamped to oddly-shaped or horizontal or vertical
surfaces.
Figure 20: Screw On Mount Figure 21: Clamp Mount
Figure 22: Claw Mount
Positioning the Talkman A700 Vehicle Dock
• Determine the best position for the device and all the associated components. If a similar device was previously
installed, check to see if the position it used is suitable for the device.
• Check that the position of the device does not obstruct vehicle controls.
• Check that the device does not obstruct the driver's view.
• Check the position of the device for user comfort over long periods.
Installing the Mounting Brackets for a Talkman A700 Vehicle Dock
The following parts are supplied by Honeywell for attaching the screw-on mount:
Quantity Description
2 Vehicle Mount, Holder/Base Screw On Attachment
1 Vehicle Mount, Arm
1 Vehicle Mount, Holder
The following parts are supplied by Honeywell for attaching the clamp-on mount:
Quantity Description
1 Vehicle Mount, Clamp
1 Vehicle Mount, Arm
1 Vehicle Mount, Holder
1 Vehicle Mount, Holder/Base Screw On Attachment
The following parts are supplied by Honeywell for attaching the claw mount:
Quantity Description
1 Vehicle Mount, Claw
1 Vehicle Mount, Arm
1 Vehicle Mount, Holder