Honeywell Vocollect, Hardware Reference Manual

Page: 184 / 316

| Honeywell Wireless Headsets | 184
Figure 131: Inserting the strap into the headband slot
8. Position the strap to go around the back of your head. The strap swivels freely on the two knobs so that it can be
positioned at the back of the head for either right-ear or left-ear wearing of the headset.
Replacing an Earpad on the SRX2 Headset
1. Hold the headset so that the earpad faces you and the electronics module faces away.
2. Grasp the earpad and earpad plate assembly and rotate them to the left to unlock the plate from the headband.
3. Lift the pad and plate assembly off of the headband.
4. Install the replacement pad.
a) Remove the ear pad by pulling it away from the ear pad plate.
b) Slide one side of the new pad over the edge of the ear pad plate and gently stretch the pad until it covers the
plate.
c) Ensure that the lip of the new pad completely covers the ear pad plate all the way around.
Figure 132: Installing a new earpad
5. Place the new earpad and earpad plate assembly onto the headset earpiece.
6. Rotate the assembly to the right pressing gently into the earpiece until the assembly locks into place.