Honeywell Vocollect, Hardware Reference Manual

Page: 112 / 316

| Talkman T5 Series | 112
2. Press the battery release button all the way down until the top of the battery pops up from the battery
compartment.
Figure 63: Removing the Battery From a Device
3. Lift the battery out of the compartment.
Battery Warm-Up Time
If a battery has been used in a cold environment, it will not begin charging until it warms up sufficiently.
Temperature of battery use Approximate warm-up time
-4°C (24.8°F) 6 minutes
-10°C (14.0°F) 10 minutes
-20°C (-4°F) 22 minutes
-30°C (-22°F) 30 minutes
About LED Indicators
Vocollect Talkman devices, SRX and SRX2 headsets, and their chargers have LEDs that indicate the state of the
equipment. These LEDs may be on, off or blink. In some cases an LED will blink, alternating between two colors.
If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See also
Troubleshooting Problems Indicated by LED .
T5-Series Device LED Indicators
LED State T5-Series Device
Green On Device is on
Also, one of the following:
• adjusting volume
• sampling noise
• retraining a word
• changing the active operator
• after speaking:
• "Talkman help"
• "Talkman repeat"
• "Talkman continue"
• "Talkman backup"